Productivity determines the slowest sustainable site - from the acceptance of green coffee to the warehouse of finished products.
The scheme combines storage, sorting, roasting, cooling, impurity removal, optional grinding, packing and packaging. The real listings below relate to packaging; packing machines are available in a separate catalog and selected by product, dose, accuracy and performance until the overall flow is agreed.
FORMAT/MATERIAL
DOSE/SPEED
BUCKLING/CONTROL
03/workflow
Check the entire sequence
01storage
02SORTING
03roasting
04Cooling
05destoner
06milling
07Filling
08packaging
09finished-production
01/step-by-step
Coordinate the flow before ordering equipment
Each phase must have a measurable outcome, a delivery boundary, and a person responsible for integration.
01
Phase 1 – material flow
Balance kilograms per hour and batches: entry, roasting loss, cooling, buffers and the release of finished coffee. Make way for raw materials, product, scrap and packaging materials.
balance
buffer
batch traceability
02
Phase 2 - Production areas
For sorting, coffee roaster, cooling, destoner, and grinding, they record steady performance, cleaning time, and safe distances.
bottleneck
aspiration
service-pass
03
Phase 3 – Packing and Packaging
The packaging measures and meters the product, the packaging works with the material, the format of the package and the seams, and the models are selected in separate catalogues, then they agree on heights, cycles, control signals and a single acceptance test.
dispenser - a separate specification
Packer - real listings
single-test
04
Phase 4 – Infrastructure and Launch
Get the electricity, gas, air, ventilation, fire safety, control communications and maintenance plan, and the reception takes place on the real route of the batch, with stops and quality fixed.
utility-network
blockage logic
FAT/SAT and training
02/project
What to confirm separately
01Do not take the total passport speed for the release of the line
02separate clean and dusty zones and provide for aspiration
03leave buffers and access to service each node
04Interfaces between machines of different suppliers
05do not consider the filling unit selected without product reconciliation, dose range, accuracy and source
06to provide for quarantine, control and storage of finished consignments
04 / PRODUCTION UNITS
Gather a stream of open source listings
Not a single listing confirms the compatibility of the entire line: Bring steady release, buffers, aspiration, power, interfaces and acceptance test along the same batch route.
Basic equipment setupRequired
01
SORTING
Optical control and mechanical calibration solve different problems: fix the defect, fractions, disengagement and steady release.
Disclosure. Showing 4 key fields from the source listing; these are supplier statements, not independent test results.
Not specified. Sensors, Channels / chutes
Conflict. voltage: 220V/3080V/415N / 110V/220V/380V/440V etc.. The structured voltage string is malformed and the supplier description gives a different generic option set, so voltage is left null.
Disclosure. Showing 4 key fields from the source listing; these are supplier statements, not independent test results.
Not specified. None of the selected fields is empty; the scope of supply still needs to be checked.
Filling
Loading image
Loading image
TP-PF-A21
TP-PF-A21 Automatic 1-500 g Coffee-Powder Auger Filler
Conflicting specifications
SupplierShanghai Tops Group Co., Ltd.
Configuration
standalone filler
Product
ground coffee
Dosing
auger
Automation
automatic
Disclosure. Showing 4 key fields from the source listing; these are supplier statements, not independent test results.
Not specified. None of the selected fields is empty; the scope of supply still needs to be checked.
Conflict. outputRate: 4000 BPH / 15-40 times/min. Both direct capacity statements are retained without conversion or selection. voltage: 1200. The Alibaba Voltage field has no unit; voltage remains null.
Filling
Image not verified against the source
Image not verified against the source
ZS-3000C
ZONESUN ZS-3000C Semi-Automatic Coffee-Bean and Dry-Product Weighing Filling Machine
No recorded specification conflicts
SupplierGuangdong Shanghang Technology Limited
Configuration
standalone filler
Product
beans, other dry products
Dosing
weighing
Automation
semi-automatic
Disclosure. Showing 4 key fields from the source listing; these are supplier statements, not independent test results.
Not specified. Dose range
Filling
Basic equipment setupRequired
05
Packaging
Examples of automatic configurations to check packet format and seam: The final rate confirms the single FAT/SAT of the entire bundle.
Maximum 8-18 bags/min in the supplier JT-300XD table
Disclosure. Showing 4 key fields from the source listing; these are supplier statements, not independent test results.
Not specified. Filling range, Nitrogen
Conflict. The generic structured capacity field lists 10-40 bags/min variants, while the model-specific supplier table states max. 8-18 BPM for JT-300XD; the model-specific value is retained. The listing offers an optional generic gas-flush and vacuum function, but it does not identify the gas as nitrogen; nitrogenSupport remains null.
Packaging
Image not verified against the source
Image not verified against the source
D-210
D-210 Automatic Coffee Bean Doypack Filling and Sealing Machine
Conflicting specifications
SupplierEastern Packaging Machinery Co., Ltd.
Line type
premade pouch
Product
beans, ground coffee
Automation
automatic
Speed
5-55 bags/min
Disclosure. Showing 4 key fields from the source listing; these are supplier statements, not independent test results.
Not specified. Nitrogen
Conflict. Alibaba exposes many selectable production-capacity values while the supplier attribute states a 5-55 bags/min operating range; the supplier range is retained. The listed 11 x 111 x 111 cm package and 20 kg gross weight conflict with the 650 kg machine record and are not normalized.
Packaging
01CATALOGUE/SUPPLIER DATA
Real machines to check the kit
The sample is filtered and ranked according to validated data, complete bundle with the dispenser and other modules check against a single specification.
Automatic Dual Chamber Brick Bag Coffee Vacuum Bag Forming Filling Packaging Machine
Model
KYV500N
Supplier
Anhui Koyo Machinery Co., Ltd.
Type of seller
Custom Manufacturer
Suitable applications
Candidate for a vacuum scenario; confirm the acceptable product, package shape and the effect of the mode on the finished coffee.
Editorial guideline PRECISION ROAST on the confirmed type of machine; not the statement of the manufacturer.
Type of machine
Vacuum packaging
Type at source
Automatic vacuum brick-bag form-fill-seal machine
Product
GROUND COFFEE
Product at source
Coffee powder in the supplier description; powder in structured attributes
POUCH FORMAT
Vacuum brick bag / six-side bag made from laminated roll film
Bag width
According to clients
Packet length
According to clients
Dose range
70 g-1 kg for KYV500N in the supplier technical table
Claimed productivity
18-20 bags/min for KYV500N in the technical table; selected variation says 20-40 bags/min
Automation
Automatic
Automation at source
Automatic; mechanical drive with PLC/servo controls
Nitrogen
Not specified by the supplier
Nitrogen at source
Not specified
DEGASSING VALVE
Not specified by the supplier
Valve at source
Not specified
Sealing
Inside-pumped vacuum, form, vacuum and reseal brick bag
Power
6.5 kW (8.72 hp) selected variation
Voltage
380 V
Dimensions
4500 x 950 x 2150 mm
Operators
Not specified
MOQ
1 set
Type of price
fixed
Claimed price at the time of inspection
US$65,000 USD
August 10, 2026
There are discrepancies in the listingThe title says dual chamber, but the supplier table distinguishes KYV500N at 18-20 bags/min from KYV500N2 with two alternating chambers at 38-40 bags/min. The selected KYV500N variation says 20-40 bags/min, conflicting with the model-specific 18-20 bags/min technical row. The page shows a 1500 kg machine but a 158 x 95 x 2185 cm, 68 kg shipping item; shipping values are not treated as machine weight or dimensions.
Candidate for a vacuum scenario; confirm the acceptable product, package shape and the effect of the mode on the finished coffee.
Editorial guideline PRECISION ROAST on the confirmed type of machine; not the statement of the manufacturer.
Type of machine
Vacuum packaging
Type at source
Automatic vacuum packing machine
Product
GROUND COFFEE
Product at source
Coffee powder; granule, powder and solid filling materials are listed
POUCH FORMAT
Brick vacuum bag; gusseted pillow, 3-side-seal and 4-side-seal bags are also listed
Bag width
40-200 mm
Packet length
60-200 mm
Dose range
250 g and 500 g configurations named in the title
Claimed productivity
25-40 bags/min in supplier attributes; selectable 15, 20, 25 or 40 bags/min variations
Automation
Automatic
Automation at source
Automatic; electric drive; eight working stations
Nitrogen
Not specified by the supplier
Nitrogen at source
Not specified
DEGASSING VALVE
Not specified by the supplier
Valve at source
Not specified
Sealing
Vacuum brick bag making; weighing, forming, packing and sealing
Power
1.5 kW selected variation
Voltage
220 V, 50/60 Hz
Dimensions
8800 x 3800 x 4000 mm
Operators
Not specified
MOQ
1 set
Type of price
Based on order quantity
Claimed price at the time of inspection
GBP 81,334.50 for 1-4 sets; GBP 73,872.62 for 5+ GBP
August 10, 2026
There are discrepancies in the listingThe card lists a 1500 kg machine and 8800 x 3800 x 4000 mm machine dimensions, but the shipping item is shown as 11 x 11 x 10 cm and 20 kg; shipping values are rejected as non-machine data. The speed appears as both a 25-40 bag/min supplier range and four selectable capacity values; both source wordings are retained.
There are discrepancies in the listingThe supplier dimension string has no unit, so millimetres were not inferred. The structured machine weight is 100 kg while a separate supplier field says 94 kg; weight is outside this research schema and neither is normalized.
Compare the steady output of each site on the overall timeline with batches, cleanups, readjustments and stops, constrains the process by the slowest mandatory step.
Why not consider a set of listings as a finished line?+
The presence of models in the catalogs does not confirm their compatibility with each other, for packaging and packaging, the product, dose, package format, stable cycle and interfaces are separately compared, and then a common acceptance test is performed.
What to check at the reception of the integrated line?+
The route of the real batch, traceability, release of a suitable product, dose accuracy, seam quality, stops, safety, cleaning and recovery after failure.
Build a system from testable modules
Record the flow, delivery boundaries, pace, control and points of product transfer between machines.
